Description:
Intelligent CCFL-LED UV lamp with up to 48 W power based on dual-LED / UV-LEDs of the new generation. This device is suitable for professional nail salons as well as for beginners and do-it-yourselfers. The lamp can cure all types of gels and hybrid varnishes with UV and LED photo initiators.
This light curing device impresses with its colored design. The device goes in and out automatically thanks to the built-in light barrier.
The device also has 3 time settings. You can choose between 10sec, 30sec and 60sec. This CCFL - LED-UV device is also ideal for foot modeling, as the base plate is attached with a magnet and can therefore be easily removed to place a foot under it.
Device instruction:
1. Plug the power pack into the socket on the back.
2. After the lamp has started, the operating time can be set with the time setting buttons.
3. The usual time buttons are 10s, 30s, 60s
4. While working in the selected time 10s, 30s, 60s, press the button of the selected time again and the device is ready and the counter is reset.
5. When you are not using the time setting button, you can put your hand inside the device and the sensor will automatically turn on the lamp.
6. The device can be reduced from 48W to 24W by pressing the ON / OFF button.
Technical specifications:
- Number of LEDs 24 pieces double LEDs (2in1)
- Maximum power consumption: 48 W (max.)
- Power supply parameters: Rated input: 100-240 V, 50-60 Hz, Rated output: DC 24 V
- Built-in timer: 10s, 30s, 60s
- Removable magnetic base plate
- Low head mode button
- With sensor
- Dimensions: 220x195x105mm
